6WUDWDV\V --
6DIHW\
'2& 5HY $
6DIHW\*XLGHOLQHV
The following general guidelines, together with the instructions provided
throughout this user guide, ensure user safety while operating and
maintaining the system. If the system is not operated as specified,
the user's safety may be compromised.
3ULQWHU
,QVWDOODWLRQ
➢
Installation and removal of the printer should only be done by qualified
service personnel.
➢
Connect the printer (and the UPS unit) to the electric outlet using a power
cord that is safety-certified.
➢
The electric outlet should be easily accessible, near the printer.
➢
Never connect the power plug to an outlet that does not have a ground
(earth) wire, and never disconnect the ground. Doing so might expose the
operator to serious danger from electric shock.
➢
The following safety statement is followed by translations to Finish,
Norwegian, Swedish and Danish, as required by local regulations:
“The machine must be connected to a grounded power outlet.”
❒
FI: Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
❒
NO: Apparatet må tilkoples jordet stikkontakt.
❒
SE: Apparaten skall anslutas till jordat uttag.
❒
DK: Apparatets stikprop skal tilsluttes en stikkontakt med jord, som
giver forbindelse til stikproppens jord.
➢
For Japan: The power cable supplied is provided for connecting the
printer to the AC electric source. Do not use it with other equipment.
➢
Leave a minimum of 15 centimeters (6 inches) between ventilation
openings and walls or other objects.
3ULQWHU
2SHUDWLRQ
➢
The printer should only be operated by persons trained by a Stratasys
customer-support representative.
➢
All persons operating or maintaining the printer should know the location
of first aid and emergency equipment and how to use it. Never block
access to this equipment.
➢
Keep fingers and other body parts clear of the printer when closing the
cover.
➢
Never attempt to open the printer while it is working.
➢
Never override the interlock safety switch.
➢
If the interlock safety switch ever fails, do not use the printer.
➢
Several parts of the printer remain extremely hot even after it has stopped
operating. Avoid touching the UV lamps and the print block.
895DGLDWLRQ
The UV lamps used in the printer emit dangerous radiation
➢
If the UV lamps remain on when the printer is open, do not stare directly
at the UV light. Shut down the printer and call your Stratasys service
provider.
