Unloading
The unloading area should be a level surface.
An area of 10 m
2
(108 sq ft) is required for the forklift to remove the printer from the delivery truck.
A clearance of 120 cm (4 ft) around the back and sides of the packaging is required for unpacking the
printer.
The installation location must be accessible from the unloading area. The customer is responsible for
unloading the printer from the truck and transferring it to the installation location. Minimum space
requirements for unloading the printer are shown in the figure below.
Figure 2 Unloading dimensions—top view
Note:
Dimensions are shown in centimeters.
Stratasys J826
Shipment and Delivery
DOC-18005 Rev. E
©
2019-2020 Stratasys. All rights reserved.
8
