DT3 CleanStation
DOC-01121 Rev. A
3-7
4 Installation
4.1 Selecting a Location
Prepare an installation area that meets the following conditions:
• a level and stable surface, which is able to bear the load of the cleaning station
(45.4 kg/100 lbs)
• near a sink or drain
• near a power socket
Do not place the unit so that the power cable becomes tight or disconnects
from the power socket.
• at least 15 cm (6 inches) clearance on each side
• room temperature between 18°C and 25°C (65°F-77°F)
Recommendations:
• a non-slip floor because water may drip from cleaned models
• a nearby source of water
4.2 Connecting the Drainage Hose
To connect the drainage hose:
1. Connect a standard ¾" garden hose to the hose fitting at the back of the unit.
Figure 1 Drainage valve and hose fitting
2. Insert the drainage hose into a drain, sink, or container, according to local
waste disposal regulations.
