10
www.strata.co.nz
www.strata.co.nz
EZIMIG 205 / ADVANCEMIG 255
-P-
O
Programme Selection Screen
Press the Programme selection button to enter the
programme selection screen. Rotate the RH knob to select
the desired programme relevant to (Welded material, wire
type, shielding gas and wire diameter). The previous chart
listing the synergic programmes can be found located
inside the wire drive door. After selecting a suitable pro-
gramme, pressing again will lock in the selection and
return you to the main weld screen.
Main Welding Screen
Programme Zero can be set to utilise the Manual selection
mode and selection of Voltage and Wire speed can be set
using the LH and RH control knobs.
22.6 126
