background image

12.11

13

Strapex STR 64

CAUTION!

Used where there is dan-

ger to life and health.

WARNING!

Used for danger which 

can cause material  

 

damage.

NOTE!

Used for general infor-

mation and information    

which if not followed can 

cause faults in the  

 

operating sequence.

 

            

GENERAL INFORMATION

These operating instructions are intended to simplify 

familiarisation with the strapping tool and the pos-

sibilities of application for the intended purpose. The 

operating instructions contain important information 

concerning the safe, proper and efficient use of the 

strapping tool. Observation of the information will help 

to avoid danger, reduce repairs and stoppages and 

increase the reliability and service life of the strapping 

tool.

The operating instructions must always be available 

at the place of operation of the strapping tool. They 

must be read and observed by all persons concerned 

with work on the strapping tool. This work specifically 

includes operation, refilling of operating material, fault 

elimination and maintenance.

In addition to the operating instructions and the regu-

lations for accident prevention effective in the country 

of use and place of application, the recognised tech-

nical regulations for safety and proper working must 

also be observed.

      2.1  INFORMATION ON ENVIRONMENTAL           

          PROTECTION

This tool is manufactured without any physical or che-

mical substances which could be dangerous to health. 

For disposal of all the parts, the governmental instruc-

tions must be observed.

Summary of Contents for STR 64
















































Reviews: