USER MANUAL
WWW. ST R A N D L I G H T I N G .CO M
ACCLAIM LED CYC
8
2
INSTALLATION
MOUNTING
The unit should be mounted via its screw holes on the bracket.
Always ensure that the unit is firmly fixed to avoid vibration
and slipping while operating. When installing the fi xture, al-
ways use a safety cable that is certifi ed to hold up to 12 times
the fi xture’s own weight.
The luminaire must be installed by qualifi ed professionals.
CONNECTING DATA AND POWER
A maximum of 32 luminaires may be connected in any one DMX
data link.
A maximum of 9 luminaires may be connected in 120V, 60Hz.
A maximum of 16 luminaires may be connected in 230V, 50Hz.
NOTE:
This maximum limit applies to the luminaire “daisy chain” only. Your system or console may require
fewer luminaires on a single data link path. Consult your console documentation for more information.
To connect power and data:
Step 1.
Connect data cable from console to fi rst luminaire in chain at DATA IN connector.
Step 2.
If required, connect additional data cables from DATA THRU connectors to DATA IN connectors of
remaining luminaires in link.
Step 3.
At last luminaire in link, install male termination connector at DATA THRU connector. (Luminaires and
other devices on the same DMX chain may not function properly without termination.)
Step 4.
Connect AC Input Cable connector to power input source.
Step 5.
Dress AC input and data cables and secure them so that they will not interfere with luminaire head
and yoke movement.
