USER MANUAL
WWW. ST R A N D L I G H T I N G .CO M
ACCLAIM LED CYC
12
the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Display On Time
To select Display On Time, press the ENTER button to confirm. Use the UP/DOWN button to select Auto(30
seconds since last press) or On, press the ENTER button to store. Press the MENU button back to the last menu
or let the unit idle one minute to exit menu mode.
Reset Defaults
To select Reset Defaults, press the ENTER button to confirm, Are You Sure? will show on the display, press the
EN- TER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit
menu mode.
SERVICE MENU
To select Service, press the ENTER button to confirm, use the UP/DOWN button to select Status, Diagnostics,
Version, Fixture Hours, Crossload(Software) and Password(2606).
Status
To select Status, press the ENTER button to confirm, No Errors or a list of errors will show on the display, press
the MENU button back to exit.
Diagnostics
To select Diagnostics, press the ENTER button to confirm. Use the UP/DOWN button to select Fan Check or
Temp, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
Version
To select Version, press the ENTER button to confirm, Version will show on the display, press the MENU button
back to exit.
Fixture Hours
To select Fixture Hours, press the ENTER button to confirm, Fixture Hours will show on the display, press the
MENU button back to exit.
Crossload(Software)
Select Crossload(Software), press the ENTER button to confirm, Are You Sure? will show on the display, press
the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit
menu mode.
NOTE:
Incoming DMX must be removed from the fixture or software crossload will not be activated.
Password(2606)
Select Password(2606), press the ENTER button to confirm. Use the UP/DOWN button to select White Balance
or Change Mode, press the ENTER button to store. Press the MENU button back to the last menu or let the unit
idle one minute to exit menu mode.
White Balance — To select White Balance, press the ENTER button to confirm. Use the UP/DOWN button to
select Red, Green, Blue, Lime or Reset to Defaults (Reset to White Balance), press the ENTER button to store.
Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Change Mode — To select Change Mode, press the ENTER button to confirm. Use the UP/DOWN button to
select ZOOMSPOTM, PLE, Fresnel or CYC, press the ENTER button to store. Press the MENU button back to the
last menu or let the unit idle one minute to exit menu mode.
