USER MANUAL
WWW. ST R A N D L I G H T I N G .CO M
ACCLAIM LED CYC
18
TROUBLESHOOTING
The following are a few common problems that may occur during operation.
Luminaire does not work; light and fan do not turn on.
• Check power connection and main fuse.
• Measure the mains voltage on the main connector.
Not responding to DMX controller.
• If DMX LED is not illuminated, verify that the DMX cables are properly connected.
• If the DMX LED is illuminated and there is no response, verify DMX address settings and the DMX
polarity.
• If you experience intermittent DMX signal problems, check the pins on the connectors or on the PCB.
• Test with a diff erent DMX controller.
• Check if the DMX cables run near or alongside high voltage cables that may cause interference to the
DMX interface circuit.
CLEANING
Cleaning the inside of the luminaire must be carried out periodically in order to optimize the light output.Clean-
ing frequency depends on the environment in which the fi xture operates. Damp, smoky or particularly dusty
surroundings can cause greater accumulation of dirt on the fi xture’s optics.
• Clean with a soft cloth using glass cleaning fl uid.
• Dry parts carefully.
• Clean the external optics at least every 30 days.
CARE AND MAINTENANCE
APPENDIX A
