Strand Lighting ClassicPalette, Installation And Setup Gude, Page: 39 / 90

Light Palette
Release/Undo
31
L
IGHTING
C
ONTROL
C
ONSOLE
I
NSTALLATION
& S
ETUP
G
UIDE
21. Release/Undo
• Press once to activate the UNDO feature.
• Press again (or twice) to release last altered attribute.
• Press again (third time) to release all selected channels.
• Press again (fourth time) to release all captured channels.
• Press [SHIFT] + [REL] to bring back previously released items. (This works in a three-stage process.)
Notes:
• If a dialog box is open, the LED will be flashing. Pressing [REL] will close the dialog box without changes being
committed.
• If channels are selected, the LED will be flashing.
• If channels have been changed but are not selected, the LED will flash in a stepped pattern.
22. Release Playback
• Pressing this button will release the cue list on the selected playback master. The cue pointer will remain at the cur-
rent cue position, therefore pressing [GO] will put you back into the same state you were in before you hit [REL
PB].
• Press [SHIFT] + [REL-PB] to release all cue lists.
23. Rem Dim
• Use [RIM DIM] as part of the command line to switch all other channels to a level of 0%.
24. Select
• Press a Select button to determine which cue list cue will be written to by default when you record cues. The
'selected' cue list will have an Amber LED on.
• Pressing this button is the same as using the mouse to highlight a cue list in the cue list directory.
• To quickly record cues to a cue list (even if it is not the currently selected cue list) press [REC] then [SELECT].
The new cue will be appended to the end of the cue list and the current cue list selection will not change.
Rel
Rel-
PB
Rem
Dim
Select