Strand Lighting ClassicPalette, Installation And Setup Gude, Page: 35 / 90

Light Palette
Flw
27
L
IGHTING
C
ONTROL
C
ONSOLE
I
NSTALLATION
& S
ETUP
G
UIDE
8. Flw
• After pressing [CUE] number, the Follow On time for the cue can be entered on the command line.
• The follow On time allows the next cue in the stack to be automatically run, when the Follow Time is completed.
9. Go
• This button will do a GO on its cue list. (NOTE: The [SELECT] button does not have to be active [amber LED
On].)
• If a cue is running, the Green LED will be flashing.
• If you are sitting in a cue, the LED will be solid Green.
• If the cue list is Releasing, both the GO and the [HALT/BACK] LEDs will be flashing.
• [SHIFT] + [GO] asserts the cue list, grabbing full control of its attributes without advancing the cue list.
10. Goto
• Press [GOTO] [#] [ENTER] to take the selected cue list to the desired cue.
• The Cue Number edit box will be preloaded with the cue number of the blue highlighted line.
• Using the [NEXT] key, a desired time for the cue to execute can be set. The recorded time is the default time.
11. Group
• Press [GROUP] then [#] [ENTER] to select the channels recorded in the Group Look page and place their intensi-
ties on the encoder wheel. Alternately, these can be set to a level using the keypad. Example: [GROUP] [4] [@]
[50] [ENTER]
• Press [REC] then [GROUP] then a number to record a Look. The current levels will be stored in the Look, but if
you only want to use the selection (group), recall the Look using the group key.
• If you want traditional "Group at Level" functionality, press [LOOK] then the Look number.
• See "Show Options" in the LIGHT PALETTE Software Help Menu for assigning look pages to this key.
Flw
Go
Goto
Group