Stramatel Multisport Eco Multi-Top, Operating Instructions Manual

Page: 9 / 38

ZI de Bel Air 44850 LE CELLIER FRANCE stramatel@stramatel.com Tél. +33 (0)2 40 25 46 90
UA452MTOPB_A - Multi-top on batteries.docx Page 10
HANDBALL
Set-up
Press the ON/OFF key until the console displays the welcome screen.
Programming
Select the "Handball" mode with key 2 .
The console screen displays the stored configuration during a few seconds: length of the pre-
match period, length of game periods and mode of display of the game timer (count-up or
count-down, periods time accumulative or not), length of the extra-time periods, length of the
time-outs, display of the number of time-outs or of the number of penalties on the
scoreboard.
Press key 18 to view the data on the console screen longer.
Change the configuration with key 0 or play with the stored configuration with key 9 .
To change configuration: answer the various questions displayed on the console screen with
keys
0 to 9 , and enter your answer with key 23 .
During programming, it is always possible to come back to the previous programming with key
13 .
Pre-match timer / Game timer
Start or stop the pre-match timer with key 18 .
If needed, stop the pre-match timer to charge the 1
st
game period with key 28 .
Start or stop the game timer with key 18 .
End of the first game period: the rest timer starts automatically in count-up mode.
If the game timer was not stopped quick enough at the end of the period: come back to the
game timer by pressing keys
16 and 18 simultaneously.
Stop the rest timer and charge a new game period or an extra-time period with key 28 .
End of the last game period and end of each extra-time period: the rest timer does not start
automatically. If needed, press key
18 .
Correction of the game timer:

stop the game timer with key 18, then enter in timer correction mode by pressing
keys 16 and 18 simultaneously.

shorten the game time with key 16 or increase it with key 20 . Enter with key 18 .