ZI de Bel Air 44850 LE CELLIER FRANCE [email protected] Tél. +33 (0)2 40 25 46 90
UA452MTOPB_A - Multi-top on batteries.docx
Page 34
TIMER FUNCTION
Set-up
Press the ON/OFF key until the console displays the welcome screen.
Programming
Select the "Timer Function" mode with key
13
.
The console screen displays the stored configuration during a few seconds: mode of display of
the timer (count-up or count-down), length of time (in count-down mode).
Press key
18
to view the data on the console screen longer.
Change the configuration with key
0
or play with the stored configuration with key
9
.
To change configuration: answer the various questions displayed on the console screen with
keys
0
to
9
, and enter your answer with key
23
.
During programming,
it is always possible to come back to the previous programming with key
13
.
Timer
Start or stop the timer with key
18
.
In count-down mode: the horn sounds automatically at the end of the programmed time. The
timer continues to count on the console screen.
Correction of the timer:
stop the timer with key
18,
then enter in timer correction mode by pressing keys
16
and
18
simultaneously.
shorten the game time with key
16
or increase it with key
20
. Enter with key
18
.
Horn
Sound the horn manually with key
19
.
End of the timing
Load a similar type of timer configuration by pressing key
28
.
Load a different type of timer configuration: press key
28
, then enter in programming mode
with key
27
.
After use
The Multi-Top must be switched off and plugged in to recharge.