ZI de Bel Air 44850 LE CELLIER FRANCE [email protected] Tél. +33 (0)2 40 25 46 90
UA452MTOPB_A - Multi-top on batteries.docx
Page 8
BASKETBALL
Set-up
If used, connect the "24 seconds" control console (Model SC24 Eco) on the side of the Multi-
Top.
Press the ON/OFF key until the console displays the welcome screen.
Programming
Select the "Basketball" mode with key
1
.
The console screen displays the stored configuration during a few seconds: length of the pre-
match period, number and length of game periods, length of the extra-time periods, length of
the time-outs.
Press key
18
to view the data on the console screen longer.
Change the configuration with key
0
or play with the stored configuration with key
9
.
To change configuration: answer the various questions displayed on the console screen with
keys
0
to
9
, and enter your answer with key
23
.
During programming,
it is always possible to come back to the previous programming with key
13
.
Pre-match timer / Game timer
Start or stop the pre-match timer with key
18
.
If needed, stop the pre-match timer to charge the 1
st
game period with key
28
.
Start or stop the game timer with key
18
.
Display on the console screen the elapsed game time instead of the remaining time and vice
versa with key
21
.
End of the first game periods: the rest timer starts automatically in count-up mode.
If the game timer was not stopped quick enough at the end of the period: come back to the
game timer by pressing keys
16
and
18
simultaneously.
Stop the rest timer and load a new game period or an extra-time period with key
28
.
The number of team fouls goes back to zero (except at extra-time period).
The number of time-out requests only reaches zero at half game time and at extra-
time periods.
End of the last game period and end of each extra-time period: the rest timer does not start
automatically. If needed, press key
18
.
Correction of the game timer:
stop the game timer with key
18,
then enter in timer correction mode by pressing
keys
16
and
18
simultaneously.
shorten the game time with key
16
or increase it with key
20
. Enter with key
18
.