MUL/352/UA352MXX0XXF_F
CЄ
Page
12
TIMER FUNCTION
Turn on the control console by pressing the ON/OFF key for several seconds (the other control consoles are not used in
this mode).
TIMER PROGRAMMING :
If the control console was used previously in this function, either :
Press key
27
to be able to program it.
Press key
28
to start a new timer with the same programmed times.
If the control console was not used previously for this function, press key
27
twice to access to sport/function selection,
then choose the Timer function by pressing the key number indicated on the LCD readout.
Choose the timing mode :
"Count-up" by pressing key
0
or "Count-down" by pressing key
9
.
In the count-down mode, select the length of time desired, by pressing keys
0
to
9
. Enter your choice by pressing key
23.
TIMING :
Start the timer by pressing key
18
. Each time key
18
is pressed, the timer starts and stops alternatively.
In count-down mode, the horn will sound automatically at the end of the programmed time. The timer will continue in
count-up mode on the control console's LCD readout.
Sound the horn manually by pressing key
19
.
THE TIMER ENDED :
To recharge the initial time, press key
28
.
To modify programmed times, press key
28
, then key
27
.
