STOVES SEB900MFSe, Users Manual & Installation Handbook

Page: 17 / 40

USING THE TOUCH PROGRAMMER
Minute Minder
Select the MINUTE MINDER mode by using
the FUNCTION symbol until the MINUTE
MINDER symbol is flashing. The MIN -
UTE MINDER can be set using the or
symbols up to a maximum of
minutes.
Five seconds after setting the MINUTE
MINDER, the count down starts in steps
of seconds. The display shows the MIN-
UTE MINDER symbol & the remaining
time is displayed continuously. While set-
ting other functions the MINUTE MINDER
counts down in the background.
The remaining time can be changed at any
time by using the or symbols. The
countdown is deleted by setting the MIN-
UTE MINDER to .
The MINUTE MINDER time has expired
once it reaches ; the MINUTE MIND-
ER symbol flashes & the ACOUSTIC
SIGNAL is heard.
Touching any touch control symbol auto-
matically terminates the MINUTE MINDER
mode.
The ACOUSTIC SIGNAL & the MINUTE
MINDER symbol are switched off & the
current TIME of DAY is displayed.
Automatic cooking
There are 3 automatic cooking modes for
operating the main oven. In all cases the
main oven function should be selected
before the automatic mode is set.
Cooking Time
This mode allows you to set the amount
of time the oven operates for before it
switches off.
Select the COOKING TIME mode by using
the FUNCTION symbol until the COOKING
TIME symbol is flashing. The COOK -
ING TIME can be set using the or
symbols up to a maximum COOKING TIME
of .
Five seconds after setting the COOKING
TIME, the MANUAL mode changes to the
AUTOMATIC mode, the COOKING POT
symbol & the current TIME of DAY are
displayed.
To change or delete the time, select COOK-
ING TIME mode until the COOKING TIME
symbol is flashing. The time is changed
using the or symbols or deleted by
setting it to .
Once the COOKING TIME has expired, the
ACOUSTIC SIGNAL is heard. The display
shows & the
M
symbol flashes.
After seven minutes maximum or after
touching any of the touch control sym-
bols, the ACOUSTIC SIGNAL stops but the
M
symbol continues to flash. Touch the
FUNCTION symbol, the
M
symbol is dis-
played continuously & the current TIME
of DAY is displayed, except if the MINUTE
MINDER is active.
End of Cooking Time
This mode allows you to set the time of
day you want the oven to switch off.
The END of COOKING TIME function MUST
be used in conjunction with the COOKING
TIME function. This is in order to allow the
user to set the START TIME for the cook-
ing to begin - see the following section on
DELAYED COOKING.
To select the END of COOKING TIME mode
keep touching the FUNCTION symbol until
the END of COOKING TIME symbol is
flashing. The END of COOKING TIME can
be set using the or symbols. The
display shows the current TIME of DAY
plus the set COOKING TIME. The latest
END of COOKING TIME is limited to the
current TIME of DAY plus .
Five seconds after setting, the MANUAL
mode changes to AUTOMATIC mode & the
display shows the COOKING POT sym-
bol & the current TIME of DAY.
To modify or delete the END of COOKING
TIME, select the function until the END of