Cleaning Your Appliance
Always allow your appliance to cool down before cleaning any part of
it.
Painted, plastic, metal finish & gold coloured parts
(where fitted)
control knobs & programmer buttons, painted metal door & fascia panels, side
panels, handles, grill pan handle
Only use a clean cloth wrung out in hot soapy water.
Do not
use abrasive cleaners, wire or nylon cleaning pads on these parts.
Take extra care when cleaning over symbols on fascia panels, excessive cleaning can
lead to the symbols fading.
Glass parts
glass door panels, glass lid (if fitted)
Only use a clean cloth wrung out in hot soapy water, or a specialist glass
cleaner.
Rinse away any excess cleaner and dry with a soft cloth.
Do not use abrasives or polishes as they will scratch and damage the glass.
Warning:
Do not
operate the appliance without the glass panel correctly fitted.
Important: the inner door glass panel can be removed for cleaning but it must be
replaced the right way up (so the reflective side - if fitted - faces inward), and
pushed fully in to the
stop
position. To remove the glass panel, open the door
wide, hold the top and bottom edges and slide out.
Glass door panels
To meet the relevant Standards of Domestic cooking appliances, all the glass pan-
els on this appliance are toughened to meet the fragmentation requirements of BS
3193. This ensures that, in the unlikely event that a panel breaks, it does so into
small fragments to minimise the risk of injury.
Please take care when handling, using or cleaning all glass panels, as any damage
to the surfaces or edges may result in the glass breaking without warning or
apparent cause at a later date.
Should any glass panel be damaged, we strongly recommend that it is replaced
immediately.
!!
!
Summary of Contents for Richmond Traditional 1000G
Page 1: ......