The programmer/clock
Semi-automatic cooking
There are two types of semi automatic cooking available on this appliance.
The oven must be switched on, and in use to use either of these functions
successfully.
The Duration method allows you to set the oven for a specific length of time.
If a dish needed 2 hours to cook, then it would be possible for you to set the
oven to turn off 2 hours later. This allows you to be sure that your food will be
cooked for a set length of time and no longer.
The End Time method allows you to enter a specific time when you would like
the oven to switch off.
If you wish to leave the oven unattended, then it offers peace of mind that the
oven will have turned itself off at the set time.
However, once the program is set then it cannot be adjusted. Extra time cannot
be added, nor can the end time be extended.
To cancel the semi automatic programs, press both the Plus and Minus buttons
together. This can be done at any time during the cooking process. Then if nec-
essary, re program.
For the instructions on how to use both of these functions, please see the following
page.
Fully automatic cooking
This function incorporates both a duration and an end time and is meant to be used
when you wish to delay the start time.
We recommend that the first few times this function is used you are in the house, this
will familiarise you with your oven and prevents food from being over, or under
cooked.
Care must be taken when selecting foods for this function, it is not recommended for
certain food items which may spoil, or are sensitive to being left.
It is also advisable to set the end time to be as close to your return as possible to
prevent food being left standing.
Summary of Contents for Richmond Traditional 1000G
Page 1: ......