26
Reversing the Door
The appliance door can be reversed if required to suit
installation. Please use these instructions to reverse the
door.
These instructions assume that the door hinges are on
the right hand side of the appliance.
1.
Open the fridge door.
2.
Remove the protective plastic covers, which are
either side of the control panel at the top of the
appliance.
3.
Unscrew the fridge door hinge plate at the top
right hand side of the appliance. Take care to
support the fridge door fully as it can drop
suddenly.
4.
Lift the door carefully off the centre hinge pin,
and store safely.
5.
Remove the centre hinge screw covers and
retain for later use.
6.
Remove the infill plugs from the centre left hand
side of the appliance – taking care not to
damage the paintwork of the appliance.
7.
Remove the centre hinge from the right hand
side of the appliance – making sure the freezer
door is supported, it may drop suddenly. Store
the door in a safe place.
8.
The centre hinge pin slides easily out of the
hinge. Reverse the hinge plate by turning it 90˚
so it can be used on the opposite side of the
appliance. Re-insert the hinge pin so the spacer
rests on the top of the hinge.
9.
Refit the hinge on the left hand side of the
appliance, refit the screw covers and fit the infill
plugs into the holes on the right hand side of
the appliance.
10.
Remove the bottom hinge from the right hand
side of the appliance, and refit to the left hand
side (bottom). The hinge pin needs to be
reversed – use a 5mm socket to do this – so
that it is suitable for use.
