24
Building In The Appliance
Fix the upper and lower stiffeners to the upper connection
and the base panel. The screw holes can be filled using
the plastic stoppers. (figure 4)
Fill the left gap of the kitchen unit with the gasket (figure
5).
Remove the screws and the hole stoppers on the left of
the middle connection and fix the connecting pivot to the
refrigerator with one end in the hole which was plugged by
the stopper and the other end to the inside wall of the
kitchen unit (figure 6).
Note: The decorative panel is firmly fixed to the door
using the kit supplied and should not slide off. The
connecting pads are used to prevent this happening.
Note: The decorative panels cannot be adjusted once
fitted unless they are removed and re-fitted.
