Step 4: Fit edging strip (Q721G
only)
Before inserting the appliance into the
cabinet, fit the silicon edging strip
(supplied in the oven pack) to the front
side edges of the front frame.
Trim to size.
Fitting the edging strip:
Detail:
Step 5: Insert appliance and
secure in position
Note:
The unit housing the appliance
must be appropriately fixed.
Method 1:
Care must be taken to
ensure the appliance runners are
sufficiently engaged over the top of the
runners on the base units.
Method 2:
Insert appliance into
cabinet - ensure that it is engaged over
the top of the side runners.
Method 3:
Insert appliance into cabinet.
To secure:
Make sure the appliance is centrally
located.
Method 1:
Open the grill door and
you will see the 2 fixing holes at the
top sides of the front frame. Drill
through the fixing holes into the side
trims with a 3.2mm diameter drill.
Secure the appliance to the side trims
with the 2 remaining n˚ 8 x 12mm
(Silver) self tapping screws.
Methods 2 & 3:
Open the grill door
and secure appliance into position
using 2 n˚ 8 x 25mm (Silver) chip-
board screws through the front frame.
31
INSTALLATION INSTRUCTIONS
