manualshive.com logo in svg

Storz OR1 FUSION WO300, Instructions For Use Manual

Share
Download
Storz OR1 FUSION WO300 Instructions For Use Manual Download Page 35

Operation

Instructions for use • KARL STORZ OR1 FUSION

®

, Rel. 1.4.2 • JEB924_EN_V1.0_02-2021_IFU_CE-MDR

35

5.

Touch the 

Video

 button again to stop a capture. The video capture does not stop

automatically.

6.6.3.4 Capturing an audio sequence

Audio sequences can only be recorded and saved if the function was set up during system
configuration.

The most recently created capture is at the top of the list of audio sequences. The time
of the capture is relevant here.

1.

Select the capture source for channel 1 or 2.

2.

Touch the 

Audio

 button to start the capture.

ð

The start of the capture is confirmed in the list of audio sequences.

3.

Touch the 

Audio

 button again to stop the capture. The audio capture does not stop

automatically.

6.6.3.5 Capturing sources synchronously

1.

Select the capture sources for channel 1 and 2.

2.

Activate the 

Sync.

 checkbox to capture the sources of both channels simultaneously.

3.

Touch the 

Still

 or 

Video

 button to capture stills or video sequences synchronously.

4.

Touch the 

Video

 button again to stop the video captures.

5.

Deactivate the 

Sync

. checkbox to stop simultaneous capturing.

6.6.3.6 Displaying, labeling, and deleting captures

  ATTENTION  

Not live images! Risk of confusion!

The captures shown are not images of live surgery. Captures can be mixed up and this can
cause treatment errors.

Note the label in the image or video.

To avoid confusion between the live image from the endoscopic camera and a video recording
or a still, video recordings are labeled with "Recorded Video Replay" and images are labeled
with "Recorded Image Replay".

1.

Touch a capture from the lists on the right next to the preview window.

ð

The context menu appears:

2.

Touch the 

View

 menu item to open the capture in the preview window.

3.

Touch the 

Flag

 menu item to label the capture.

4.

Touch the 

Delete

 menu item to mark the capture for deletion.

ð

The capture is not saved and is discarded permanently during data storage.

5.

Touch the 

Delete

 menu item again to remove the deletion mark.

6.6.3.7 Forwarding captures

1.

Touch a still, a video sequence, or an audio sequence followed by 

View

.

Summary of Contents for OR1 FUSION WO300

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands