manualshive.com logo in svg

Storz OR1 FUSION WO300, Instructions For Use Manual

Share
Download
Storz OR1 FUSION WO300 Instructions For Use Manual Download Page 12

Product description

Instructions for use • KARL STORZ OR1 FUSION

®

, Rel. 1.4.2 • JEB924_EN_V1.0_02-2021_IFU_CE-MDR

12

4 Product description

4.1 Description of function

is designed for use in the operating rooms of clinics and hospitals.

The product is used to aid the implementation and documentation of medical procedures
aimed at examining and treating patients.

The following can be performed from the central touchscreen:

–

Control non-medical devices.

–

Transfer and display video and audio signals from the integrated signal sources to the
integrated peripheral devices.

–

Record, save, edit, forward, and print medical examinations and procedures in the form
of stills, video sequences, and audio sequences.

4.2 Product overview

 WARNING

Electric shock!

There is a voltage of 12 V / 2 A at the ‘Smart Screen’ socket.

Do not touch the socket during operation.

Only connect or remove the cable when the device is switched off.

1

2

3

4

5

 OR1 FUSION CONTROL

®

 front view

1

Rocker switch 

ON/OFF

Standby and operating mode

4

"Red" LED for hard disk access

2

"Yellow" standby LED

5

USB port

3

"Green" operating LED

Summary of Contents for OR1 FUSION WO300

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands