Cut a piece of approx. 50-60 cm (19-23 inch)
app
rox
. 23 inc
h (60 cm
)
As an alternative to the VOLCANO Bal-
loon, use an odor-free, heat-resistant
and food safe oven tube or oven bag,
which is used in the food industry. It
is available in nearly every drug store
and supermarket. Do not use any other
plastic bags or clingwraps. The proce-
dure to change a Balloon with a heat-
proof oven tube is described below:
Cut a piece of Balloon Material of ap-
prox. 50-60 cm (19-23 inch) and tie it
close at one end.
11. AT TACHMEN T TO T HE E A SY VA LV E W IT H BA L LOON
A DA P T ER R ES P. S OLID VA LV E
Tie the Balloon tightly closed at one end
Adjust the folds equally around the
Valve Collar making sure that the Valve
hangs straight down when the Balloon
is held at the tied up end.
Attach Balloon to Valve
As the opening of the Balloon is much
wider than the diameter of the Valve
Housing, the Balloon must be neatly
folded to Et. Fold the opening into 16
folds. Then pull the Balloon Fixation
Ring approximately 3 cm (1.2 inch)
over the open end of the Balloon and
then pull the Balloon Fixation Ring with
the Balloon over the Valve Collar until it
Ets into the intended notch.
Loosen the Balloon Matierial by insert-
ing your hand in the tube. Remove the
plastic strip lying on the Balloon Mate-
rial and use it to tie one end of the tube
up tightly.
82
