14
5. Operating the Unique 2.1
The following Profile settings can be adjusted:
1. Pause (Pre-Runtime) 0 - 99 min
2. Pump (Level A)
1 - 99 %
3. Fan (Level A)
1 - 99 %
4. Run-Time (Level A)
0 - 99 min
5. Pump (Level B)
1 - 99 %
6. Fan (Level B)
1 - 99 %
7. Run-Time (Level B)
0 - 99 min
With the HDCS, an individual profile for a show can be programmed. Two Levels (Level
A and B) with different pump and fan values and different run-times can be program-
med (Level A = settings 2, 3, 4 / Level B = settings 5, 6, 7). Also a pre-runtime can be
programmed in (setting 1) which tells the machine when it should start to run.
For example: The machine shall start to run after 30 Minutes (setting 1). Then the
stage should be filled with haze within 10 Minutes. Therefore a high pump and fan
output should be adjusted and a time of 10 Minutes (setting 2, 3, 4). After 10 Minutes
high output, pump and fan shall go down automatically to a lower step and fill the
stage with haze for another hour (setting 5, 6, 7). See diagram on page 15 also.
w? f{~{c z{x {{w{zqGJsB«f w{w ~{zw>{{\}D
4).
b) Press the Enter button [16] once to switch to the HDCS Menu. The red Timer/Profile-
LED [20] will be lit.
c) Adjust settings 1 to 7 according to the chart on page 15, using the Up/Down buttons
[15] and pressing the Mode button to switch between the settings.
j~{{{}w{ {z C w{{ Do z v~w{ ~{f ¢{
{~{[{x z{ «w{~{{}DW{}ywx{y~w}{z
as described at any time.
z?j w~{f ¢{~~{wz{zw{B{~{c z{x qGJsB«
appears on the display (Fig. 8), then press the Enter button [16].
The Timer/Profile-LED [20] flashes, indicating that the Profile is running. The green
Active-LED [18] lights as soon as the adjusted Pause (Pre-Runtime) has passed and
level A has started. The Profile can also be started via an optional radio remote.
{? j {w{~{^ZYi{ ~{f ¢{B¢{~{c z{x «[iY
appears on the display (Fig. 9). Then press the Enter button [16] once to return to
the main menu.
5.4.4.1 Using the Profile
