(8) Wet/Dry Vac
Wet/Dry Vac (5)
2.2 Grounding Instruction Continued
IMPORTANT: This adaptor may not be used in Canada.
IMPORTANT: Never cut off the grounding prong for use in a 2-prong outlet. By doing
so, you have cut off your protection from electrical shock.
Never assume that all 3-hole outlets are properly grounded. Check before use.
Never assume that an adaptor connection is properly grounded. Check the outlet with a
ground fault interrupter device which quickly indicates if a ground is connected. Correct
a faulty grounding before proceeding.
WARNING:
Improper connection of the equipment grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or service person if you are in doubt as to
whether the outlet is properly grounded. DO NOT modify the plug provided with the
equipment. If it will not fit into the outlet, have a proper outlet installed by a qualified
electrician.
3.0 Operating Tips
3.1 Dry Use
This vacuum comes equipped with a cloth filter assembly. The cloth filter assembly
should always be used when picking up dry material and can be easily disposed of
without creating a mess. Make sure the cloth filter assembly is secure inside the tank
prior to use. The cloth filter assembly should be used for dry cleaning only and must be
removed when being used for wet use.
The cloth filter assembly can be shaken out and cleaned by tapping gently to remove dust
trapped on the outside of the filter. Also, the cloth filter assembly can be blown clean.
Check the filter frequently and remove and dispose of debris when the tank is about 4/5
full. Overfilling the tank may make it difficult to remove and increases the risk of the
filter breaking and contents spilling.
• Make sure that the plug is disconnected from the source of electricity.
• Remove the top of the vacuum and ensure that the cloth filter assembly is properly
installed.
• Put the top of the vacuum back into its original position and secure it onto the tank,
snapping down the latches on both sides.
• Insert the flexible hose into the tank of the vacuum, assemble the steel wand and
connect it to the hose.
• Connect the plug to the electricity source.
• Push the switch to the on position and start cleaning.
This vacuum is equipped with multiple tools to help with various applications: scalloped
bristle floor brush for carpets, tile and other flooring and a dust brush for hard to reach
places like base boards and window sills, inside cars, furniture, etc.
5.0 Machine Schematic Drawing and Parts List
