background image

15 Year Warranty

If any component of your shed fails - we will replace it!  

Make sure your shed is built and secured according to our 

instructions as a minimum. 

The warranty does not cover damage or loss through an  

act of God. Please inform your insurance provider.

We would like  

your feedback

Please email your comments to [email protected] or fax us on  

06 878 5758. Customer satisfaction is our top priority and we are always on the look 

out for ways in which we could do better.  

Free gift

To receive a free gift, include your details when you send in your feedback or send in  

a good photo of your finished shed with your details.

To help you we have listed some questions  

that you may like to answer:

There is no need to type every question, only the question number and 

your answers are necessary. 

1.  Where did you find out about our sheds?
2.  Where did you purchase your shed? Was the sales person helpful?
3.  Were you happy with the delivery of your shed and your overall 

purchase experience?

4.  Did the assembly of your shed go smoothly and were these instructions 

clear? If unhappy, what areas do you think we could improve on?

5.  Does the shed fit your needs? What might you order differently  

next time?

6.  Did you find the DVD helpful?
7.  Do you have any other comments or suggestions you would like  

to make?

Call us on 0800 807 433 for 

tips on high wind sites.

YEAR

 

WARRANTY

Summary of Contents for Rite 4









Reviews: