SKU 93924
For technical questions, please call 1-800-444-3353
Page 2
Specifications
Item Description
Fuse Puller
4-1/8 (L) x ½ (H) x 3/8 (W) inches, orange
Test Leads
Red and Black wire w/ alligator clips;
0.32 (L) x 0.093 (dia.) inch
Wire Stripper / Crimper
Tool
9 (L) inch bolt cutter: 8-3, 10-24, 10-32, 6-32,
4-40, and ignition; wire stripper: AWG: 10,
12, 14, 16, 18, 20, and 22.
Battery Terminal Brush
3.32 (L) x 1.52 (dia.) inch
Storage Case
Folded: 10-1/4 (L) x 7 (H) x 3-1/4 (D) inches
Weight 2.7
lbs.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed
to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines or power tools in damp
or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use
electrically powered tools in the presence of flammable gases or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not
let them handle machines, tools, or extension cords. This kit contains small
parts that can be choked upon or swallowed by children.
4.
Store idle equipment. When not in use, tools must be stored in a dry location
to inhibit rust. Always lock up tools and keep out of reach of children. The small
parts within this kit can choke a child if put in their mouth.
5.
Use the right tool for the job. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. There are certain applications for which
this tool was designed. It will do the job better and more safely at the rate for
which it was intended. Do not modify this tool and do not use this tool for a
purpose for which it was not intended.
6.
Use eye and ear protection. Always wear ANSI-approved impact safety goggles.
Wear a NIOSH-approved dust mask or respirator when working around metal,
wood, and chemical dusts and mists.
