25
Translation of the original instruction
Replacing the LED illuminant
It is not possible to replace the LED illuminant. If a fault occurs, please contact your
STORCH sales team member or the STORCH service hotline.
Initial use
Please connect the light to a suitable, earthed plug socket. Then turn on the switch
on the back. Do not connect any more than 3.500 W altogether to the available plug
sockets.
Warranty
Warranty conditions
A warranty period of twelve months from the date of purchase/date of invoice applies
to our tools for commercial customers. If we have granted an extended warranty period,
this period will be noted separately in the operating manual for the equipment in questi-
on.
Claims
If you wish to claim under our warranty or guarantee, please return the complete device
and your invoice to our logistics centre in Berka, postage paid, or send it to one of our
authorised service centres. Please contact the chargeable STORCH service hotline first:
+49 (0)202 . 49 20 – 110.
Your rights under our warranty or guarantee
Claims can only be accepted for material defects or manufacturing errors, and only
assuming intended use of the appliance. Wear parts are not covered by such claims. All
claims shall become void in the event of installation of third party components, impro-
per handling and storage, as well as in the event of obvious disregard of the operating
instructions.
Repairs
All repairs have to be conducted on our premises or by an authorised STORCH service
centre.
Important environmental information about this product
This pictogram on the device or packaging indicates that the device to be
disposed of must not be disposed of as domestic waste. Return the device
to the retailer or to a public recycling centre. Observe local environmental
regulations.
In case of doubt, please contact your local waste authority.
Please read the operating instructions carefully before using this appliance.
If the appliance was damaged during transport, do not use it, and contact
your dealer.
