Stonegate Melrose Dark Cherry Assembly And Operation Manual Download

Page: 16 / 17

750W

: For low heat function – Press this switch while the O/I switch is in the ON position. The indicator light

will turn on.

1500W

: For high heat function – Press this switch are in the on position. The indicator light will turn on (keep

the 750W in the ON position).

Temperature Control

: To adjust the temperature to your individual requirements, turn the temperature control

dial to the right (clock-wise) to increase the desired temperature and to the left for lower temperature. This

temperature control dial can only be used while the O/I switch and 750W & 1500W switches are in the ON

POSITION. When the heater reaches the desired temperature, the heater and 750W/1500W indicator light will

turn off but the fan still keeps working with airflow. Adjust this knob to restart the heat.

Dimmer Control Knob

: Turn the dimmer dial clockwise or counter-clockwise to get the desired flame intensity.

The dimmer switch can only be used when the O/I switch is in the on position.

Note: When the O/I switch is turned off, all other heater functions will stop even though the switches may be in

the ON position.

Maintenance

WARNING:

Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire or

electric shock.

Cleaning

Before cleaning any parts of the fireplace make sure to first turn off the controls and then unplug the unit from

power source.

CAUTION:

Wait until the unit has completely cooled before attempting any cleaning.

Cleaning glass door: Remove dust with clean dry cloth. Remove fingerprints and other marks from glass door by

using a clean damp cloth. Do not use abrasive cleaners or spray liquids on glass door surfaces.

Metal and metal painted parts should be cleaned with clean damp cloth only. Do not use abrasive cleaners or

spray liquids on this surface.

RISK OF FIRE:

Do not exceed the recommended bulb wattage.

REPLACING THE LIGHT BULB

Summary of Contents for Melrose Dark Cherry


















Search results

Summary of Contents for Melrose Dark Cherry

Reviews:

Related manuals for Melrose Dark Cherry

Brands by name

Popular brands

Stonegate Melrose Dark Cherry, Assembly And Operation Manual

Search results

Summary of Contents for Melrose Dark Cherry

Reviews:

Related manuals for Melrose Dark Cherry

Brands by name

Popular brands