StoneFly DR365V-1204 Getting Started Guide
V8.0.3x
©StoneFly Inc. 2020 | All rights reserved
Page 5
Introduction
1.1
Introduction
This document is aimed for system administrators who would like to know how to get started
with StoneFly DR365V Appliance. It describes initial steps for launching the appliance.
The StoneFly DR365V is the ideal purpose-built hyperconverged infrastructure solution for
backup and disaster recovery which also allows you to consolidate all of your server and backup
systems into one easy to manage appliance.
This guide gives an overview of the product, rack mounting instructions and initial installation
procedure. Information for using the features of the StoneFusion software is found in the Storage
Concentrator User Guide.
•
•
•
Veeam Backup & Replication User Guide for VMware
•
Veeam Backup & Replication User Guide for Hyper-V
Each StoneFly DR365V comes preconfigured with VMware vSphere or Microsoft Hyper-V
hypervisor, a StoneFly SCVM™ Virtual Storage Controller, and an Enterprise Backup Engine
running on a second VM. Additional Virtual Machines can be installed on the DR365V as
needed as long as adequate processing cores and system memory are available to support those
VMs. Contact your StoneFly sales representative for details.
DR365V-1204 12-Bay / 2U Model
The DR365V comes in five standard configurations:
•
12-bay / 2U model features maximum of 12 x 3.5” SAS drives
•
16-bay / 3U model features maximum of 16 x 3.5” SAS drives
•
24-bay / 2U model features maximum of 24 x 2.5” SAS drives
•
24-bay / 4U model features maximum of 24 x 3.5” SAS drives
•
36-bay / 4U model features maximum of 36 x 3.5” SAS drives
