V8.0.3x
©StoneFly, Inc. 2020 | All rights reserved
Page 47
StoneFly DR365V-1204 Getting Started Guide
Initial Installation
Adjusted settings are shown below. Enter
q
at the command prompt to exit back to the service
menu. Enter
q
again to exit out of the user console service.
Note:
the browser access to the SCVM Management GUI is blocked while the
SC Service
menu
is active. Also note that there can be a short delay before the SCVM GUI becomes available.
2.10
Configuring the SCVM
Note:
The process of SCVM configuration is the same for Hyper-V and VMware hypervisors.
Launch a browser then navigate to https://<configured IP address>.
DR365V Login Screen
1. In the User ID field type:
admin
2. In the Password field type:
M@n4g1ng
3. Click
Submit
. The Home Page screen will appear.
4. Click
System
.
5. Click
Admin
.
6. Click
Auto Save
. The Auto Save screen will appear.
