background image

34

866-795-1586 • WWW. STONEAGETOOLS.COM

TERMS AND CONDITIONS AND WARRANTY INFORMATION

Warranties set forth herein extend only to End-Users, 
meaning customers acquiring, or that have previously 

acquired, a product manufactured by StoneAge 

(“Product”) for their own use and not for resale, either 

directly from StoneAge Inc. (“StoneAge”) or from a 

StoneAge Authorized Dealer or Reseller (“Dealer”).  No 
warranty of any kind or nature is made by StoneAge 
beyond those expressly stated herein.  

1. 

LIMITED WARRANTY PERIOD.

  Subject to 

the limitations and conditions hereinafter set forth, 
StoneAge warrants its Product to be free from defects 
in workmanship and material for a period of one (1) year 
from the date of purchase by the End-User, provided that 
the end of the limited warranty period shall not be later 
than eighteen (18) months from the date of shipment of 
the Product to the Dealer or the End-User by StoneAge 
(“Limited Warranty Period”).  All replacement parts which 

are furnished under this Limited Warranty and properly 

installed shall be warranted to the same extent as the 

original Product under this Limited Warranty if, and only 

if, the original parts were found to be defective within the 

original Limited Warranty Period covering the original 

Product.  Replacement parts are warranted for the 
remainder of the original Limited Warranty Period.  This 
Limited Warranty does not cover any component part of 

any Product not manufactured by StoneAge.  Any such 
component part is subject exclusively to the component 

manufacturer’s warranty terms and conditions.

2. 

LIMITED WARRANTY COVERAGE. 

 StoneAge’s 

sole obligation under this Limited Warranty shall be, at 
StoneAge’s option and upon StoneAge’s inspection, to 
repair, replace or issue a credit for any Product which is 
determined by StoneAge to be defective in material or 
workmanship.  StoneAge reserves the right to examine 
the alleged defective Product to determine whether this 
Limited Warranty is applicable, and final determination 
of limited warranty coverage lies solely with StoneAge.   
No statement or recommendation made by a StoneAge 
representative, Dealer or agent to End-User shall 
constitute a warranty by StoneAge or a waiver or 
modification to any of the provisions hereof or create any 
liability for StoneAge.    

3. 

WARRANTY SERVICE PROVIDERS.

  Service 

and repair of the Product is to be performed only by 

StoneAge authorized service representatives, including 
Dealers who are authorized repair centers, with 
StoneAge approved parts.  Information about StoneAge 

authorized service representatives can be obtained 

through the StoneAge website at www.stoneagetools.

com/service.  Unauthorized service, repair or 

modification of the Product or use of parts not approved 
by StoneAge will void this Limited Warranty.  StoneAge 
reserves the right to change or improve the material and 

design of the Product at any time without notice to End-

User, and StoneAge is not obligated to make the same 
improvements during warranty service to any Product 
previously manufactured.

4. 

WARRANTY EXCLUSIONS.

  This Limited Warranty 

does not cover, and StoneAge shall not be responsible 

for the following, or damage caused by the following:  
(1) any Product that has been altered or modified in any 
way not approved by StoneAge in advance in writing; 
(2) any Product that has been operated under more 
severe conditions or beyond the rated capacity specified 
for that Product; (3) depreciation or damage caused 
by normal wear and tear, failure to follow operation or 
installation instructions, misuse, negligence or lack 

of proper protection during storage; (4) exposure to 
fire, moisture, water intrusion, electrical stress, insects, 
explosions, extraordinary weather and/or environmental 
conditions including, but not limited to lightning, natural 
disasters, storms, windstorms, hail, earthquakes, acts 
of God or any other force majeure event; (5) damage to 
any Product caused by any attempt to repair, replace, 
or service the Product by persons other than StoneAge 
authorized service representatives; (6) costs of normal 

maintenance parts and services; (7) damage sustained 

during unloading, shipment or transit of the Product; 
or (8) failure to perform the recommended periodic 

maintenance procedures listed in the Operator’s Manual 

accompanying the Product.   

5. 

REQUIRED WARRANTY PROCEDURES.

  To be 

eligible for warranty service, the End-User must:  (1) 

report the Product defect to the entity where the Product 
was purchased (i.e. StoneAge or the Dealer) within 
the Limited Warranty Period specified in this Limited 
Warranty; (2) submit the original invoice to establish 

ownership and date of purchase; and (3) make the 

Product available to a StoneAge authorized service 
representative for inspection to determine eligibility 
for coverage under this Limited Warranty.  This Limited 
Warranty shall not extend to any person or entity who 
fails to provide proof of original purchase from StoneAge 

or a Dealer.  No Product may be returned for credit 
or adjustment without prior written permission from 

StoneAge.   

WARRANTY:

 

TERMS AND CONDITIONS AND WARRANTY INFORMATION

Summary of Contents for TORUS TR-130





































Reviews: