background image

10

866-795-1586 • WWW. STONEAGETOOLS.COM

TORUS TR-130 MAINTENANCE KITS

TORUS SERVICE

Product training and proper tools are required to service the Torus. If you are uncomfortable performing the service, 
bring the tool to your authorized dealer.

Take care throughout the entire procedure to keep the internals clean and free from grit, lint, and contamination. 

Failure to do so could result in premature failure after service.

LIST OF TOOLS:

•  Pick
•  Slot Screwdriver
•  Hex wrenches;

     1/8”, 1/4”, 3/16”, 5/16”, 5/32”, 2.5mm, and 3mm

LIST OF MATERIALS:

•  Clean lint free rags or blue shop towels
•  Swagelock Blue Goop Anti-Seize or Equivalent
•  Mobil SHC PM 460 Synthetic Grease or equivalent 

MOBIL® is a registered trademark of the Exxon Mobil Corporation.
Blue Goop® is a registered trademark of the Swagelock.
Loctite® is a registered trademark of the Henkel Corporation.

TORUS TR-130 SERVICE AND OVERHAUL KIT PARTS

TR130 600 –SERVICE KIT

TR130 610 –OVERHAUL KIT

GP 043 BLUE GOOP, 2 OZ

1

BJ 007 Bearing, Angle Contact, BECBY

2

GP 180 Loctite, 242 Blue .5ml Bottle

1

BR 196 Retaining Ring, HD External 1.188

1

HC 012-TO H.P. Seal Assembly

2

CJ 009 Bearing

1

MJ 011-C Carbide Seat (Coated)

2

GP 043 Blue Goop, 2 oz

1

PL 556 Torus Family User Manual

1

GP 180 Loctite, 242 Blue .5ml Bottle

1

SA 059 O-Ring, G12

2

GP 805 Container, Round Hinged Lid Plastic 11/4

2

TR 245 HP Seal, Manifold

2

HC 012-TO H.P. Seal Assembly

2

WS 210 O-Ring

1

MJ 008 O-Ring

1

MJ 011-C Carbide Seat (Coated)

2

PL 556 Torus Family User Manual

1

PTL 078 Retaining Ring, SS

1

SA 059 O-Ring, G12

2

SG 009 Ball Bearing

1

TR 134 Seal

2

TR 136 Bearing, Needle Roller

2

TR 138 Retaining Ring, SS Spiral Int .968

2

TR 245 HP Seal, Manifold

2

TR130 105 O-Ring

4

TR130 113 Seal

2

TR130 114 Retaining Ring, SS Spiral Int 1.56

2

TR130 230 Bearing, Ball

2

TR130 233 O-Ring

2

TR130 234 Retaining Ring, SS External 17mm

2

WS 029 Seal, Large

1

WS 210 O-Ring

1

TR130 610 

Overhaul Kit

TR130 600 

Service Kit

 

= Replacement part is 

available in this kit

 

=  Replacement  part  is        

available in this kit

Part Diagram Color Code Key

Summary of Contents for TORUS TR-130





































Reviews: