StoneAge AUTOBOX ABX-2L, User Manual

Page: 31 / 36

31
866-795-1586 • WWW.STONEAGETOOLS.COM
PARTS DIAGRAM
AUTOBOX ® (ABX-100-8) GUIDE ASSEMBLY
MAIN ASSEMBLY PARTS GUIDE
# PART NUMBER DESCRIPTION QTY
1 ABX 101-001 HOUSING 1
2 ABX 102 INSERT THREAD CLAMP WITH HELICOIL 1
3 ABX 103 MACHINED BOLT .50-13 MALE 1
4 ABX 104 BAR CLAMP 1
5 ABX 105 BLOCK, DETENT 1
6 ABX 106 SCREW, CENTER 1
7 ABX 107 BARREL NUT, .38-24 RH 1
8 ABX 108 BARREL NUT, .44-24 LH 1
9 ABX 109 V-BLOCK, GUIDE TUBE .38 1
10 ABX 110 V-BLOCK, GUIDE TUBE .44 1
11 ABX 111 KNOB, MODIFIED 1
12 ABX 112 WASHER, THRUST 1
13 ABX 113-001 COUPLING 2
14 ABX 114 REDUCER, .459 ID GUIDE TUBE 2
15 ABX 118 CAP, HOSE GUIDE 2
16 ABX 120-001 MOUNTING BRACKET, INSIDE 1
17 ABX 124 ADAPTER, .745 ID GUIDE TUBE 1
18 ABX 130-001 QUICK-RELEASE PIN 1
19 ABX 131 FLANGED BUSHING 2
20 ABX 132 BALL PLUNGER 2
21 ABX 133 SCREW, BHCS, FLANGED 1
22 ABX 135 WASHER, PLASTIC 1
23 ABX 136 SPRING PIN 1
24 ABX 138 SCREW, SHOULDER 1
25 ABX 139 COLLET REFERENCE PLATE 1
26 GS 325-06 SHCS .25-20 X 1.50 SS (TB 044) 2
27 GSB 313-0075 BHCS 6-32 X 1.88 LG SS 4
28 GSB 319-015 BHCS .19-24 X .38 LG SS 1
29 GSF 316-015 FHCS .16-32 X .38 LG SS 6
30 GSF 325-025 FHCS .25-20 X .63 LG SS 2
31 GSF 337-03 FHCS .37-16 X .75 LG SS 4
32 GW 319-L LOCK WASHER SS 1
NOTE:
1. REAM OR DRILL BUSHING TO .375/.376 AFTER INSTALLATION.
2. KNOB INSTALLATION: SCREW KNOB ONTO SHAFT UNTIL IT JUST
BOTTOMS OUT ON PLASTIC WASHER. THEN BACK OFF TO FIRST
SPOT FOR PIN INSTALLATION.
3. TO ASSURE THE V-BLOCKS ARE LOCATED PROPERLY, THREAD THEM
ON THE CENTER SCREW AND MAKE THEM BUTT UP AGAINST EACH
OTHER. ADJUST THEIR POSITION AS NECESSARY TO LOCAT THE
MATING PLANE AT THTE DIMENSION SHOWN.
4. RED LOCTITE: PN: 262 OR EQUIVALENT.
5. BLUE LOCTITE: PN: 242 OR EQUIVALENT.
6. BLUE GOOP IS A SWAGELOK BRAND ANTI-SEIZE. AN EQUIVALENT
ALTERNATIVE IS ACCEPTABLE.
7. ADAPTER ONLY USED WITH 5/8” (15.89 mm) OD GUIDE TUBES.
8. ADAPTER ONLY USED WITH 7/8” (22.23 mm) OD GUIDE TUBES.