StoneAge AUTOBOX ABX-2L, User Manual

Page: 20 / 36

20
866-795-1586 • WWW.STONEAGETOOLS.COM
THUMBSCREW
KNOB
TUBE
INSERT
THUMBSCREW
KNOB
(ALIGN WITH
PRE-DRILLED
HOLE ON
TUBE INSERT)
THUMBSCREW
KNOB
(ALIGN WITH
PRE-DRILLED
HOLE ON
TUBE INSERT)
FILTER, REGULATOR,
LUBRICATOR, ASSEMBLY
(FRL)
2
1
3
5
4
CONTROL BOX SET-UP
ASSEMBLE CONTROL BOX, FRL, AND TRIPOD BASE
1. Setup the tripod base in a location with good visibility to the
bundle face, but at a safe distance away from waterblast zone.
2. Slide the vertical tube into the tripod base. Secure with the
supplied thumbscrew knob. Note: The vertical tube has a hole
through one wall that the thumbscrew must engage.
3. Slide the Filter, Regulator, Lubricator (FRL) assembly over the
vertical tube down to the tripod base. Secure with the supplied
thumbscrew knob.
Note: The vertical tube has a hole through one wall that
the thumbscrew must engage.
4. Slide the Control Box over the vertical tube. The Control Box
has a stop that keeps it located at the top of the vertical tube.
Secure with the supplied thumbscrew knob.
5. Install and tighten the short 1/2 in. (13 mm) I.D. hose between
the FRL and the Control Box.