9
866-795-1586 • WWW.STONEAGETOOLS.COM
CLAMP SELECTION
is dependent upon the heat exchanger geometry, bolt holes, hole spacing, and flange accessibility.
QUICK CLAMPS (LWP 518)
are for use with heat exchanger flanges that provide a robust clamping surface or if flange holes are
inaccessible. Align clamps on the surface of the flange to maximize flange engagement to clamps. (Figure 1)
\
SLOTTED QUICK (LWP 552) AND PLATE CLAMPS (LWP 519)
are for use with heat exchanger flanges that have easily accessible
bolt holes. Use quick clamps or plate clamps, depending on the spacing of the hole pattern. (Figures 1 & 3)
SCAFFOLD
QUICK CLAMPS (LWP 554)
are for use with scaffolding in situations
where they may be no way to clamp directly onto the heat exchanger. (Figure 4)
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
LIGHTWEIGHT POSITIONER CLAMP SELECTION
SLOTTED QUICK CLAMP
(LWP 620 KIT CONTAINS 4)
SCAFFOLD QUICK CLAMP
(LWP 554-K KIT CONTAINS 4)
QUICK CLAMP
(LWP 621 KIT CONTAINS 4)
PLATE CLAMP
(LWP 622 KIT
CONTAINS 2)
