23
866-795-1586 • WWW.STONEAGETOOLS.COM
CONTROL BOX TO AUTOBOX® (ABX-2L-V2) HOSE TRACTOR ASSEMBLY
WARNING
Appropriate size Collet selection is
CRITICAL
to ensuring proper anti-withdrawal prevention of the tool. See “Recommended Collets For
Common Hose Sizes” plaque on the top plate of the ABX-2L-V2 Tractor or the side of the vertical carriage on the Lightweight Positioner.
COLLET INSERTION, HOSE, AND HOSE STOP INSTALLATION
1. Remove Quick Release Pin and pull out existing Collet.
2. Insert Banshee tool on hose through the AUTOBOX
®
(ABX-2L-V2)
Hose Tractor, and hose Hose Guide Assembly. Be sure that the
Banshee tool and hose end pass the location of the Collet.
3. Select the appropriate Collet size for the diameter of the hoses.
(See “Recommended Collets For Common Hose Sizes” plaque on
the top plate of the ABX-2L-V2 Tractor or the side of the vertical
carriage on the Lightweight Positioner.)
4. Install the Collet and quick release pin.
5. Pull on the hoses from the back of the AUTOBOX
®
(ABX-2L-V2)
Hose Tractor to ensure that the Collet does not allow the Banshee
to back out of the Guide or Hose Tractor.
6. To install hose stops, push tool through until the tips are 1-2”
(25-51 mm) past the end of the tube bundle. Loosely install the stop,
then push toward the mounting bracket and tighten in place.
2
COLLET
REMOVED
BANSHEE TOOL WITH HOSE END,
MUST BE PAST THE COLLET SLOT
BEFORE INSERTING THE COLLET
1
COLLET
INSERTED
4
6
5
OPERATION
