14
866-795-1586 • WWW.STONEAGETOOLS.COM
HOSE GUIDE ASSEMBLY TO LIGHTWEIGHT POSITIONER SET UP
1/2”
(13
mm)
1
2
3
Heat exchanger
tube bundle face
Adjust position until the Guide
Tubes are approximately 1/2 in
.
(13 mm) away from the face of
the heat exchanger.
ATTACH HOSE GUIDE ASSEMBLY TO LIGHTWEIGHT POSITIONER
1. Using a 9/16 in. wrench, loosen all four rail clamp bolts located on the vertical carriage. Install the Hose Guide Assembly into the rail
clamps and adjust position until the Guide Tubes are approximately 1/2 in. (13 mm) away from the tube sheet face. Tighten the four rail
clamp bolts.
2. Loosen the Pitch Adjustment Levers and adjust the guide tubes until they are in line with pitch of the tubes in the bundle.
3. Tighten Tube Clamp and Pitch Adjustment Levers until tubes are secured in position.
