Maintenance
26
Battery-operated suction sweeper KSE 1000
1 Frok crown of the driving
linkage
2 Back nut
3 Swivel lever
4 Frictional wheel roller
5
Driving linkage
6
Adjustment of the free
wheel
7
Frictional wheel
8
Driving belt
Loosen the back nuts of the turnbuckle of the driving linkage.
To reduce the distance between the frictional roller and the frictional
wheel, you will have to turn the turnbuckle counter clockwise.
Make sure you only only turn the turnbuckle one or two threads.
Turning the the turnbuckle too far, could result in the dangerous
possibility that both rods of the driving linkage might not find suf-
ficient support and fall apart during operation!
Check the position of the swivel lever:
Insert the key into the key-operated switch.
Start up the suction sweeper.
Carefully actuate the driving lever to move forward.
The swivel lever has to push the frictional wheel against the fric-
tional roller.
The driving belt has to be freely movable.
The suction sweeper has to move forward.
Carefully actuate the driving lever to move backwards.
CAUTION!
