Maintenance
18
Battery-operated suction sweeper KSE 1000
5.4.2
Mounting the Side Brush
Fasten the flange plate to the side brush.
Push the lateral brush on the axle of the lateral brushes.
Push the spring plug through the borholes of the lateral brush flange
plate and through the borehole of the axle of the lateral brushes (un-
til ground contact).
5.4.3
Adjustment of the Side Brush
Operational wear necessitates additional adjustment of the side
brushes.
Park the suction sweeper as described.
Take the key out of the key-operated switch.
Unlatch the lowering lever of the side brushes.
Push down the lowering lever.
Remove the entire main panelling.
1 Screw of the height-
adjustment of the lateral
brushes
2 Back nut
Loosen the back nut.
To lower the lateral brush, you will have to turn the screw of the
height-adjustment of the lateral brushes clockwise.
To raise the lateral brushes, you will have to turn the screw of the
height-adjustment of the lateral brushes counterclockwise.
Set the lateral brushes to their desired position.
Tighten the back nuts. Put on the main panelling.
