Maintenance
20
Battery-operated suction sweeper KSE 1000
Pull the sweeping rollers out of the machine and remove any debris,
cords, etc., from the roller tunnel and from the pick-up pins.
5.5.2
Installing the Sweeping Rollers
Push the sweeping rollers under the machine.
Observe the sweeping rollers' sense of rotation while sliding them
in.
1 forward drive
2
direction of motion of the
sweeping rollers
Each roller end is equipped with a keyway. Turn the sweeping roller until
the pick-up pin of the rear roller swing fits into the keyway of the sweep-
ing roller. Slide the sweeping rollers in as far as possible.
Set the front roller swing onto the free sweeping roller ends.
The roller swing is equipped with two turning levers.
Each turning lever end is equipped with one pick-up pin.
2
sweeping roller
keyway
1 threaded rods
3
pick-up pin
