Maintenance
22
Battery-operated suction sweeper KSE 1000
2
threading rod
4
counternut B
1 Bowden pull
wire
3
counternut
5
spring
Increasing the Sweeping Contour by Lowering Sweeping Rollers
Loosen counter nut A on the threading rod of the Bowden pull wire.
Turn counternut A counterclockwise.
Now lock counternut A in place by counternut B.
Decreasing Sweeping Contour by Lifting Sweeping Rollers
Loosen counternut B
Turn counternut B clockwise by a few more threads.
Lock counternut B in position by counternut A.
Attention!
The sweeping rollers are pendulous and adapt to uneven surfaces
up to a certain degree. They are put into operating position by
means of the rotation only. Only the tips of the brushes will touch
the ground when lowering the device during standstill. That is why
force on the sweeping roller lever will only be exerted when the
brushes are rotating!
Further Possible Adjustment:
Park the suction sweeper as described on page 10.
Take the key out of the key-operated switch.
Lift the sweeping rollers and arrest the lowering lever of the sweep-
ing rollers
Let the lever snap in arresting position.
CAUTION!
