STOLTZFUS SPREADERS TSC0S5, Owner'S Manual

Page: 7 / 40

Keep hands, feet and clothing away from moving parts. Loose or floppy clothing
should not be worn by the operator.
Do not insert a stick, tool or hands into conveyor. spinners or other moving parts
Stay well clear of the spreader's spinners while operating.
Do not breath the dust when spreading dusty materials. Wear a dust mask or other
approved respiratory device.
Do not climb on any part of the spreader at any time. Do not use the PTO guard as a
step.
Do not step over the PTO shaft. Stay clear of the PTO at all times.
If the unit is equipped with a ladder, be careful in getting on and off the ladder,
especially in wet, icy, snowy or muddy conditions. Clean mud, snow or ice from steps and
footwear.
Keep PTO shall telescoping tube shields turning freely. Keep PTO master shield on
tractor. Replace any shields that are missing or damaged.
Never operate the PTO above the normal RPM rating. The tractor's PTO MUST match
the implement PTO.
Install controls so that they are located for convenient use. Position them so that they
do not interfere with any vehicle control, with driver or passenger mobility or with access to
or from the vehicle.
Do check the spread pattern to ensure that you arc getting a uniform pattern.
Use only properly rated tires.
Do not tow at speeds in excess of 20 MPH when transporting this spreader. Never
exceed a safe travel speed.
Observe all applicable tra1Tic laws when transporting on public roadways (where legal
to do so). Check local laws for all highway lighting and marking requirements.
Always install a SMV emblem on this spreader for transporting on roadways and keep
the emblem clean and bright.
The buyer assumes all responsibility for the safe use of this product, as well as the
materials spread with
it.
If you have any questions regarding the safe and proper use of this
spreader or options and attachments, please contact your dealer or the manufacturer at 610-
286-5146.