MAINTENANCE SCHEDULE
Refer to the drawing on the following page·
1 . Daily
Until grease pushes
Four (4) universal
out
joint bearings
2. 1/2 hour
One full stroke of
Nine
(9)
drive line
grease gun
bearings
3.
20 hours
One full stroke.
Four (4) body shaft
bearings (low rpm)
4. After adjustment
Fill 2 tighteners
_
Fill tube with grease after each
adjustment
5. Weekly
Until grease pushes out
Shear hub
6. Weekly
Until grease pushes out
Fourteen (14) spring spring
suspension. (8 ton only)
7. Weekly
Until grease pushes out
Three (3) auger pivot
points (if applic)
8. Daily
Until grease pushes out
One (1) telescoping
shaft
9. Daily
Until grease pushes out
One
(1)
clutch engagement
guide (ground drive)
10. 10 hours
One full stroke.
Eight (8) jac k shaft
bearings (ground drove)
11. 5 hours
Until grease pushes out
Sower spindle bearings
12. Each
Season
#90 gear
oil to
check point
l3. Daily
One full
stroke
Four
(4)
brake actuators
(if applicable)
14. Daily
Tighten Sprocket set screws and Lug nuts
Summary of Contents for TSC0S5
