Stoelting M202A, Operator'S Manual

Page: 5 / 35

Page 2
SAFETY WARNING:
Do not attempt to assemble or take apart any parts of the machine without making sure the
refrigeration and beater switches are in the “OFF” position and the keys are removed. Serious bodily
injury may result.
IMPORTANT:
In order to eliminate the custard machine as a source of bacterial contamination, it is extremely
important that the following instructions be followed exactly each time the machine is disassembled
for cleaning as part of nightly shutdown procedures. Ross’s makes no warranties expressed or implied
as to the introduction of bacteria or other pathogens into the custard mix run through the machine. It is
beyond the scope of this manual to address proper mix handling procedures.
WARNING:
NEVER USE HOT WATER ANYWHERE INSIDE MACHINE.
Standard Parts included per machine
1 Each Dipping Water Trough, Part #DT-0020
1 Each Splash Guard, Part #
C-4000-14
4 Each Dividers for dipping well, Part # C-5000-20
1 Each Beater Shaft Wrench, Part # C-2000-57
1 Each Barrel Cleaning Brush, Part # BR-0030
1 Each Barrel Brush Handle, Part # BR-0035
4 Each 6” Casters (Standard on Water Cooled Units)
4 Each 6” Adjustable, Stainless Steel, Legs (Std. on Air Cooled Units)
1 Each Operating Manual
Standard Parts included with machine, per barrel
1 Each Short Slide (chute), Part # C-4000-20
1 Each Flow Valve Assembly, Part # C-9000-58
1 Each Flow Control Rod, Part #C-9000-80-SV
1 Each Front Plate, Part #C-2000-52-SV
1 Each Front Gate, Part #
C-2000-56
1 Each Beater Shaft, Part #C-9000-51
4 Each Wing Nuts, Part #
NT-0010
1 Set of 8 Blades, Part # C-2000-51
1 Set of 8 Springs, Part # C-2000-50
1 Each Large O-rings, Part #624782 (for Front
Plate)
1 Each Rear Shaft Seal, Part #
SL-0010
1 Each Key
Extra Parts included per machine:
2 Each Blade, Part # C-2000-51
2 Each Spring, Part # C-2000-50
2 Each Large O-rings, Part # RG-0010 (for Front
Plate)
2 Each Rear Shaft Seal, Part #
SL-0010
2 Each Keys
Flow Control
Rod
Short Slide Blades
Splash Guard
Front Plate
Keys
Beater Shaft
Front Gate
Large O-Ring
Wing Nuts
Blades
Flow Valve
Assembly
Not Pictured:
Divider for Water Trough
Barrel Brush
Petrol-gel
Operating Manual
Back Seal Washer
Flow
Valve
Arm
Springs
Beater
Shaft
Wrench