Stiroplus SP1050, Manual

Page: 14 / 19

13
Shot of steam
Quickly press the steam trigger twice to produce shot of steam. (see Fig.1). An interval of at least 15 seconds must be
maintained between two continuous cycles. The “Shot of steam” function can be only activated under medium and
high steam rates.
Descaling indicator
If the descaling indicator illuminates, it indicates the steam generator shall be cleaned by virtue of the mineral
deposits collecting to a degree. And you shall perform descaling by following the operation in Point 3 of
“CLEANING
AND MAINTENANCE” . When the system ensures the mineral deposits have been removed, the indicator will
extinguish.
Power cord storage box & Steam supply hose storage box
When not in use, the steam supply hose and power cord can be folded well and stored in their respective storage
boxes.
Power cord storage box
Steam supply hose storage box
Automatic power off
The appliance will turn off automatically if do not activate the “Steam” function or do not activate the control
buttons on the control panel within 10 minutes.
BEFORE FIRST USE
1. Remove any sticker or protective foil from the soleplate.
2. Heat up the iron at the maximum temperature and iron over a piece of damp cloth for several minutes for the
purpose of removing any residue on the soleplate according to the section of “Steam ironing” .
NOTE: It is normal that strange odor comes out from the unit for the first use. This will cease after a short while.
NOTE: Some particles may come out of the soleplate when you use the iron for the first time. This is normal; the
particles are harmless and stop coming out of the iron after a short while.
NOTE: When you switch on the appliance, the steam generator may produce a pumping sound. This is normal;
the sound tells you that water is pumped into the steam generator.
NOTE: During the heating process of the soleplate, there will be little steam coming out from the soleplate
Fig.1