Stiroplus SP1050, Manual

Page: 13 / 19

12
CONTROL PANEL
Filling aperture
Fill the water tank with water through the filling aperture. Make sure that the water shall not exceed the MAX mark
of water tank.
Power switch
Plug in the appliance and press down the power switch, the power indicator will illuminate, the low steam rate is
regarded as defaulted one and its indicator will flash. Press down the power switch for about 2 seconds, and the
appliance will be disconnected from the power supply.
Steam rate control button
The steam rate can be selected low, medium or high by the steam rate control button. Anyone to be selected, its
indicator will flash, and it will illuminate solidly after finish preheating which means that the steam is ready for use.
The indicator of selected steam rate will blink when the steam rate is switched from low setting to high setting, while
it will illuminate solidly when the steam rate is switched from high setting to low setting.
Temperature dial
Turn the dial to set ironing temperature based on the garment needs to be ironed.
Temperature indicator
When the iron is heating up, the temperature indicator will illuminate. Once the iron has reached the selected
temperature, it will extinguish. The temperature indicator will be cycled on and off as the iron maintains the selected
temperature during ironing.
Steam trigger
After pressing down the power switch and choosing the desired steam rate, it indicates the steam can be used for
ironing when the steam rate indicator changes from flashing to illuminating. At that time, press the steam trigger
with a little force, the steam will be sprayed from the soleplate continuously. When loosen the steam trigger, the
appliance can only be used for dry ironing without steam.