26
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: W60A1A401B PRODUCT CODE: 48662 07/2015
The table below lists possible causes and solutions for common problems that you
may encounter with the dishwasher. If you follow all the instructions below but still
cannot solve a problem, please contact our after sales support line.
Problem
Possible cause
Solution
The dishwasher
does not run.
The fuse is blown or
the circuit breaker is
activated.
Replace the fuse or reset the circuit
breaker. Unplug any other appliances
on the same circuit with the
dishwasher.
The power supply is not
turned on.
Ensure the power and the dishwasher
are turned on, the cord is properly
plugged in and the door is closed
securely.
The water pressure is
low.
Check that the water supply is
connected properly and the water is
turned on.
Noise
Some audible sounds are normal, such as sound from water
spraying, food remnants being shredded and the detergent
dispenser opening.
Utensils are not secure in
the baskets or something
small has dropped out of
the baskets.
Make sure everything is secured in the
dishwasher.
The motor hums
(because the dishwasher
has not been used
regularly).
If you do not use the dishwasher often,
we recommend you run it once a week
on a short wash program, which will
help keep the seal moist.
Suds in the tub
Inappropriate detergent
Use only specific dishwasher
detergent to avoid suds. If this occurs,
open the dishwasher and let the suds
evaporate. Add 3-4 litres of cold water
to the tub, close the door securely,
then run the “Soak” program to drain
out the water. Repeat, if necessary.
Spilled rinse aid
Always wipe up rinse aid spills
immediately.
FAQs
