32
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: W60A1A401B PRODUCT CODE: 48662 07/2015
Looking after your dishwasher
•
After every wash, turn off the water supply to the appliance and leave the door
slightly ajar so moisture and odours are not trapped inside.
•
Before cleaning or performing maintenance, always unplug the dishwasher from
the socket.
•
To clean the control panel, use a lightly dampened cloth and dry the area
thoroughly afterwards.
•
To clean the exterior and rubber parts of the dishwasher, do not use solvents or
abrasive cleaning products. Only use a cloth with warm, soapy water. Or use a
good appliance cleaner.
•
To remove spots or stains from the surface of the interior, use a cloth dampened
with water and a little white vinegar, or a cleaning product made specifically for
dishwashers.
•
Clean the door seals periodically with a damp sponge to remove any trapped
food remnants and prevent odours developing inside the dishwasher.
Other Useful Information (Cont.)
In special situations
Going on holidays
When your dishwasher is not going to be used for some time, we recommend you run
a wash cycle with the dishwasher empty and then unplug the dishwasher from the
socket, turn off the water supply and leave the door slightly ajar. This will help with
door seal durability and odour prevention inside the appliance.
Moving the dishwasher
If you must move the dishwasher, try to keep it in a vertical position. Only put it on its
back if absolutely necessary.
Protect it from freezing
If your dishwasher is left in an unheated place during winter and temperatures are
likely to drop to below zero degrees Celsius, you should take certain precautions to
prevent water freezing in the pipes. Unplug the dishwasher from the electrical power
supply and turn off the water supply. Then ask an authorised service technician to:
•
Disconnect the water inlet pipe from the water valve.
•
Drain any water from the inlet pipe and water valve (use a pan to catch the water).
•
Reconnect the water inlet pipe to the water valve.
•
Remove the filter assembly from the bottom of the dishwasher and wipe up any
water left in the sump with an absorbent sponge.
