manualshive.com logo in svg

Stirling STR-WPTL6K, Instruction Manual

Share
Download
Stirling STR-WPTL6K Instruction Manual Download Page 5

5

AFTER SALES SUPPORT

1300 886 649

[email protected]

AUS

MODEL: STR-WPTL6K   PRODUCT CODE: 62971  11/2018

General Safety Instructions

This heading indicates that there is a serious risk of 
injury if you do not adhere to the warning(s).

This heading indicates that care should be taken to 
avoid injury to persons or damage to property.

A tick in a circle accompanies a measure or action that 
you should do or follow.

A cross in a circle accompanies a measure or action 
that you should NOT do.

Warning

Caution

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE 

Read this manual thoroughly before first use, even if you are familiar with this type 
of product. The safety precautions enclosed herein reduce the risk of fire, electric 
shock and injury when correctly adhered to. Keep the manual in a safe place for future 
reference, along with the completed warranty card and purchase receipt. If applicable, 
pass these instructions on to the next owner of the appliance. 

Always follow basic safety precautions and accident prevention measures when 
using an electrical appliance, including the following:

Electrical safety

•  Before connecting and turning on the washing machine, ensure the electrical 

voltage and circuit frequency correspond to those indicated on the appliance.

•  Only connect the washing machine to a grounded (earthed) electrical outlet. 
•  Do not insert any objects into the appliance.
•  Do not kink or damage the power cord, and position it out of the way so no one 

steps on or places anything on the cord or against it.

•  Do not overload the wall outlet. Overloading can result in fire or electric shock.
•  If the supply cord is damaged, it must be replaced by the manufacturer or its service 

agent or a similarly qualified person in order to avoid a hazard.

•  Never use this washing machine with a power adaptor or an extension cord.
•  Unplug the washing machine from the power supply before cleaning, servicing, 

maintenance or moving the appliance. Pull by the plug, not by the cord.

•  After use, always unplug the appliance and turn off the water.

•  Warning!

 All electrical work must be done in accordance with local and national 

electrical codes as applicable and should be undertaken by licensed and qualified 
persons only.

Summary of Contents for STR-WPTL6K

































Reviews:

No comments

Brands by name

Popular brands

Load more brands